These universal 1/2" (12.7mm) thick subframe spacers are an easy and effective solution for dropping the front or rear subframe to eliminate driveline wobble or additional stress on the axles for vehicles we do not offer spacers for. Installation is easy; simply loosen the front subframe bolts, lower the subframe, slide the spacers in, and re-torque the subframe bolts. Typical installation time is 30 minutes.
These spacers are universal and some manufacturer's bolts may not have enough thread to properly engage, so you may need to get longer bolts depending on your application. You will need to measure your OEM bolt and get one that is 1/2" (13mm) longer. You will also need to verify thread pitch (1.5 or 2.0, fine or coarse).
BOLTS ARE NOT INCLUDED
