VW Golf GTI Lower/ Lift Suspension
WE CAN OFFER ANY SPRING RATE FROM 50lb-1600lb, JUST ASK US FOR HELP
- Designed for on-road lowering and lifting
Optimized for a height range of 1.5" lower to 1.5" higher than stock
- 2 Front Assemblies
- 2 Rear Assemblies
- Upright shocks
- Radial bearing on Front Assembly
- LPS Barrel springs on front
- LPS Linear springs in rear with helper springs
- OEM spec front travel
- OEM spec rear travel
- Highly Polished Electro-Plated Nickel Cartridge
- Rebuildable Shock
- Linear rate piston
- Stainless Steel Shims
- Light Weight Synthetic Shock Oil
- Rebound Adjustable : 20 pts
- Rubber bushing rear upper mounts
- Brackets for Sensor Lines on shock body
- Individual Parts Available
Frequently Asked Questions:
Q: Do I need to add subframe spacers?
A: As the lift is minimal, you will be within spec of the OEM geometry, and spacers will have an opposite effect when lowering ride height. We would recommend rear lateral links (control arms) to dial in rear camber.
Q: Should I get comfort or sport springs?
A: This depends on what you're after, for a more touring feel, opt for our comfort series. If you want to increase handling, our sport spring is about 15% higher rate than the stock springs.
Q: Will the GS Lite work with my [brand] strut spacers?
A: We don't recommend using a spacer on this suspension.
Q: Can I get different spring rates as I carry a lot of gear and tow?
A: Absolutely! Just tell us what rate you'd like in the order notes
Q: Can the shocks be rebuilt or do I have to buy replacements?
A: These are completely rebuildable, by us or anyone with nitrogen
Q: What's the difference between these and the GR Lite?
A: The GR Lite uses a longer travel shock, which when lowering with greatly reduce compression travel, or could give too much travel when lowered, causing your tire to contact the fender or inner fender area. The GS uses the same travel specs as the OEM suspension to optimize a +/- 1.5" ride height change in either direction up or down.